?double sided masking tape,double sided tape,double sided pe foam tape tape,two side tape,adhesive tape,adhesive tape china,acrylic tape,OPP tape,double sided sticky tape,PE foam tape,Acrylic foam tape,adhesive tape,Masking Tape,Double Sided OPP Tape,Tissue Tape,
Install date: Feb 13rd, 2015
Product: CARLIKE super quality 3D carbon fiber vinyl
1. Air bubble free
2. Durability: Guarantee 3-5 years on car body
3. Adhesive style: Transparent, polyacrylate, 100% removable
4. Film thickness(with glue): 180 microns, glue thickness: 30μm, release paper 140g
5. Film produce technology: Calendered, High flexible PVC film
1. Clean the car body
2. Measure the vinyl for engine hood
3. Remove the back side release paper, not remove all paper
4. Use squeegee to make the air bubbles out. need do it carefully and slowly.
5. Use heat gun to heat the film and strech it for the car body curver face.
6. Use kinife to cut off the edges
Remark: the car engine hood is the high temperature place, usually more than 80 oC, then must be choose the high quality film with 100% removable glue, if choose the bad film, glue will be leave on car when remove.